The Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is a fit for your 2020 Tiffin Allegro Red Motorhome and is a favorite for ease of use. The Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7 may be needed as well to connect your brake controller to your vehicle wiring if you don't already have a 7-way trailer connector. I've attached an article and a couple videos to assist. If you need more wire, you can use # 10-2-1 sold... view full answer...
Removing the old wipers from your 2015 Tiffin Allegro RED is actually a little easier than you might think. It's somewhat hard to describe but if you check out the 1:10 mark of the install video I attached you can see how to get the old blade off and install new ones. I just installed wipers on my car the other day and it uses the same mechanism. view full answer...
Most likely what you found is a connector for installing a brake controller but we do not have a plug and play harness that will attach the P3 part # 90195 to it so you'd have to test the pins to verify this. Use a circuit tester like part # PTW2993 to see if you can find a pin that has voltage all the time and one that has voltage only when the brakes are applied. If those two circuits are present it is for a brake controller.
The black wire of the controller runs to the hot all the time... view full answer...
The battery of the sensors that come with the # TST-507-RV-6-C is CR2032 and is replaceable. Normal battery life of the sensors is about 1.5 years. view full answer...
Which Snap Pad is needed can be determined by identifying and measuring your stabilizers. You need to measure across the foot, on top, to determine what size they are and identify what system you have. From an online search, it appears that many of the 2014 Tiffin Allegro Open Road Motorhomes came from the OEM with the HWH leveling system. This is a combination of two 8" round jack feet up front and two 10" round jack feet in the rear. If you have this system on you motorhome, you will... view full answer...
The tallest cover we have for Class A Motorhomes is the Aquashed RV Cover for Class A Motorhome part # 290-52207 which fits motorhomes up to 40' long and 11' tall. The cover is not designed to reach the ground, just from the roof to the bottom of the cab. It may be a bit short for this application but it will still work nonetheless. view full answer...
The P3 part # 90195 that you referenced is a really great brake controller option for your 2017 Tiffin Allegro Red motorhome. Since we don't have a brake controller install harness that fits your motorhome you'll need to wire the controller to the vehicle harness by function. Or if you wanted a super easy solution the Curt Echo Mobile # C51180 would just plug into your 7-way and once synced to your smart phone would be ready to tow. view full answer...
Thanks for the picture and part numbers of your RV step. Based on that we know that the correct linkage replacement you need is the part # LC369488. view full answer...
I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part # LC363985. view full answer...
While we do have brake controller options for your 2017 Tiffin Allegro Red Motorhome, on a 2016 Freightliner XCM chassis, we aren't aware of any plug and play connectors on the chassis itself. The only options we have require splicing but if you found a plug for a brake controller you can easily cut off the connector and splice a brake controller to that.
For your application I recommend the Redarc Tow-Pro Elite # RED44FR because it installs out of the way (you only need access to the... view full answer...
From what I read online, it appears that the Rad step thru e-bikes weigh around 65 lbs.
The weight of your bikes alone would rule out the Hollywood Racks # HR1450Z you'd mentioned, as its capacity is 50 lbs per bike so we'll move on.
The # HLY84FR Sport Rider SE has plenty of capacity at 80 lbs per bike, and could be used on your Jeep as well as on your motorhome without issue, but Hollywood Racks hasn't approved it for use on a flat towed vehicle, because the rack hasn't been tested... view full answer...
The Voyager WiSight 2.0 Wireless RV Backup Camera System part # ASA57YR is what I recommend for a quad view capable monitor. It has a very large 7" monitor so you can get a pretty clear view of each camera. The monitor is also both full color and has a built-in speaker so you can hear what's going on outside the motorhome. The additional camera can be purchased using the Voyager WiSight 2.0 Wireless RV Backup Camera part # ASA64YR. view full answer...
I checked with Lippert and the part number you mentioned corresponds with the Revolution Kwikee step and the replacement control module you need then is the part # LC363985. view full answer...
I suggest the SnapPad EQ Round Jack Pads for Equalizer Leveling Systems w/ 10" Round Jack Feet, # SP64FR4. This fits Class A motorhomes with leveling systems that have 10" round jack feet, qty of 4 each. view full answer...
Go To Results